單面掛渣自動去除機，進給速度2.0~4.0m/min，可以好加工100*100mm工件，最大寬度670mm

GDM-165U自動掛渣去除機/經濟型掛渣去除機產品簡介：

 這是一款經濟型的單面掛渣去除機，加工速度在2.0米~4米/分鐘，可以有效的去除鋼板切割下來的掛渣。

GDM-165U自動掛渣去除機/經濟型掛渣去除機動力參數：

磨削電機功率.................................................................................................3750W*1

進料電機功率................................................................................................功率750W

氣源（壓縮空氣）..........................................................................................0.5MPa

風機風量..........................................................................................................1*25m3/min

所需電源..........................................................................................................AC380V 50HZ

凈       重 ..........................................................................................................1700Kg

GDM-165U自動掛渣去除機/經濟型掛渣去除機加工能力：

加工板寬.......................................................................................................650mm

****小板材.......................................................................................................100*100mm

加工板厚.......................................................................................................9~60mm

加工板長........................................................................................................>170mm

臺面高度........................................................................................................900mm

臺面尺寸........................................................................................................675*1900mm（設備工作臺總長度）

去掛渣速度.....................................................................................................2~4.0m/min

一次進給完成...............................................................................................上兩面